FG 316SS Ceramic Mist Nozzle

Characteristics:

FG Series nozzle is a fine mist nozzle made of 316 stainless steel, which consists of body, cap, spray disc and filter head. And it has a built-in guide flow vane and anti-drip device to avoid water dripping at low pressure. When the pressure is below 15 bar, the nozzle stops working, and when the pressure exceeds 25 bar, the nozzle starts spraying.

Compared to the FD, FE and FF Series, besides different the thread size and body, the FG nozzle also has a larger ceramic spray disc. Ceramic material has a higher finish than stainless steel, and the liquid has a stronger pass rate at the same pressure.

FG Series nozzle, is widely used in greenhouse humidification and cooling, under the supply of high-quality water, the service life can be up to 6 years. And we are available to order the components to replace the old ones, including ceramic spray disc, anti-drip valves, filter plug, guide flow vane, etc.

Construction:

• Two-piece round body with a groove vane 
• Built-in an anti-drip valve and replaceable filter
• Standard material is 316 stainless steel
• Connection types are available in M8 or 1/8" male either BSPP or NPS parallel pipe thread
• Optional ceramic spray orifices from 0.1mm, 0.15mm, 0.18mm up to 0.25mm

Typical Application:

• Greenhouse cooling and humidity control
• Humidity maintenance in storage workshops
• Paper mill, cigarette mill humidity control
• Textile mill humidity control and eliminate static electricity

Misting and Humidification in Greenhouse

Mist systems are an important part of any greenhouse operation, as they play a vital role in the production of both seed and vegetative plant material. Their fundamental purpose is to deliver an intermittent source of water in low volumes to plant material being vegetatively propagated or to seeds being germinated. Mist systems, when compared to irrigation systems, typically deliver a smaller particle of water for shorter intervals of time. Depending on how a mist system is used and the type of crop it’s being used on, the crop’s production period can either be accelerated or sl ...

Read More

Humidification for Mushroom Growth

Mushrooms are moisture-loving creatures, and all stages of growth are inseparable from humidity. Therefore, from spore germination to harvesting, a certain amount of water and relative air humidity are required. It can also be said that without water, there is no life. If the air is dry, its growth rate and output will be affected, so it is necessary to humidify the mushroom house at this time. In this way, the air humidity can be increased, thereby promoting the growth of mushrooms and improving the benefits of mushrooms. ...

Read More

Tobacco Moisture Control

As far as cigarette factories are concerned, from tobacco leaf storage, tobacco production, to rolling, these processes have high requirements on ambient temperature and humidity. ...

Read More

How to Buy from RELAB?

If you want to inquire about our products or order them directly, please tell us all information you know about this product, and we will recommend a suitable product based on your information. ...

Read More

How to Get a Free Sample?

Now, you are very interested in our products, but have never used our products before, and still have some concerns in quality and effect if you buy them directly. It will be better to get a few samples to reassure the concerns. ...

Read More

How to Pay the Order?

Because all our products are shipped from China to other places, all payment will also be transferred to the account of our Chinese company. ...

Read More

When will I Receive the Nozzle?

We usually list a lead time on our quotation or proform invoice. If the lead time is 6 days, then the express will take 3-7 days, the delivery time will be 9-13 days. ...

Read More