High Pressure HDPE Pipe

Characteristics:

Our misting system PE pipes are manufactured from premium high-density polyethylene (HDPE) using single-screw extrusion with precision molds. The HDPE pipes feature excellent fluid transfer capabilities for industrial applications, high-pressure water systems, and agricultural irrigation, with minimal water absorption making them ideal for humid environments.

Compared with nylon pipe, HDPE pipe has less water absorption, smaller expansion coefficient, and lower cost, which is an ideal choice for some cooling places that want to reduce costs. The regular size is 3/8" (9.52mm) outer diameter.

When the HDPE pipe is assembled with the quick connector, it is recommended to use a special chamfering knife to chamfer and deburr both ends of the cut pipe, and the width should not exceed 2.5mm. The inverted tube can pass through the O-ring in the fitting more smoothly, avoiding installation failure and water leakage.

304 Stainless Steel Pipe with Grooves

The 304 stainless steel pipes can be selected from the outer diameter in 3/8", 10mm, 12mm. Its thickness can be 0.7mm or 1.0mm. The length can be customized in different sizes from 150 mm to 2500 mm. ...

Read More

PA Nylon Coil Tube

The core advantage is that it can withstand working pressures of 100 bar or even higher, and is especially suitable for high-pressure fluid transportation scenarios thanks to the high toughness and creep resistance of PA6 material. ...

Read More

Custom Plastic Misting Tubing

This is a fixed-length nylon or HDPE tubing. The length can be cut into different sizes according to customer requirements. The inlet of each section of the tubing is beveled with a special chamfering knife to remove burrs. ...

Read More

Note: Deburring isn't required when using Relab 600 series compression fittings - the pipe can directly engage the lock ring. Our technical team is always available to assist with any installation questions.

Construction:

• Black high pressure misting tubing
• Select from HDPE raw material
• Lower water absorption rate
• 3/8"(9.52mm) outer diameter
• 100 meters per roll

Typical Application:

• Misting Fan
• Fog Cannon
• Snow Making
• Artificial fog landscape
• Livestock farm disinfection and cooling