FH Brass Ceramic Fog Nozzle
- Number:
- 219
- Brand:
- RELAB
- Model:
- FG Series
- Construction:
- Two-piece round body with an anti-drip valve
- Material:
- Brass body and 316SS cap
- Thread:
- 1/4 male BSPT/NPT threads
- Pressure:
- 30 to 80 bar
- Spray angle:
- 30° to 85° at 60 bar
- Orifice:
- 0.1mm, 0.15mm, 0.18mm, 0.2mm and 0.25mm
- Flow rate:
- (0.2mm) 3.1 lph at 60 bar
- Filterable:
- Yes
Design Features
Characteristics:
The FH Series nozzle is a fine mist nozzle made of brass body and 316 stainless steel cap, which is the same construction and atomization effect. And it has a built-in guide flow vane and anti-drip device to avoid water dripping at low pressure. When the pressure is below 15 bar, the nozzle stops working, and when the pressure exceeds 20 bar, the nozzle starts spraying.
Compared to the FD, FE and FF Series, besides different the thread size and body, the FH nozzle has a larger ceramic mist disc and 1/4" taper pipe thread. Ceramic material has a higher finish than stainless steel, and the liquid has a stronger pass rate at the same pressure.
FH Series nozzle, is widely used for humidification and cooling, under the supply of high-quality water, the service life can be up to 6 years. And we are available to order the components to replace the old ones, including ceramic spray disc, anti-drip valves, filter plug, guide flow vane, etc.
FD Cleanable Ceramic Mist Nozzle
Model FD is a common high pressure mist nozzle. Its open pressure is 20 bar due to an internal anti-drip valve. Model FD-CE is a ceramic orifice nozzle without the filter. The construction is the same as FD-SS model, except for the orifice.
Read MoreFE Filterable Ceramic Mist Nozzle
Model FE is a lengthened high pressure mist nozzle. Besides of the anti-drip valve, it still has a filter base. Its mini. orifice diameter is 0.1mm. The 316 stainless steel is available on request.
Read MoreFF Filterable Ceramic Mist Nozzle
Model FF is made of 304 stainless steel, which consists of the body, cap, spray disc, anti-drip valve and filter plug. It has a hexagon body with 1/8" male taper pipe threads. All parts are removable, cleanable and replacement.
Read MoreFG 316SS Ceramic Fog Nozzle
Compared to the FD, FE and FF series, the FG model has a larger ceramic spray disc and SS316 body. Ceramic material has a higher finish than stainless steel, and the liquid has a stronger pass rate at the same pressure.
Read More
Construction:
- Two-piece round body with a groove vane
- Built-in an anti-drip valve and replaceable filter
- Standard material is 316 stainless steel
- Connection thread is available in 1/4" male either BSPT or NPT taper pipe thread
- Optional ceramic spray orifices from 0.1mm, 0.15mm, 0.18mm up to 0.25mm
Typical Application:
- Greenhouse cooling and humidity control
- Humidity maintenance in storage workshops
- Paper mill, cigarette mill humidity control
- Textile mill humidity control and eliminate static electricity