FK Ceramic Fine Mist Nozzle

Characteristics:

FK Series is a high pressure fine mist nozzle with a ceramic spray disc. This FK mist nozzle has the same structure as other FG Series, the difference is that its thread size is M8, with a smaller filter plug.

The nozzle also contains an anti-drip device and stainless steel guide-flow vane, and the liquid flows at high speed under a water pressure of 30 bar~80 bar to form a centrifugal vortex in the guide vanes, ejecting extremely fine hollow fog particles from the nozzle.

The FK mist nozzle cap and hole are separated which is convenient for users to choose stainless steel discs, ceramic discs, or ruby discs.

The advantages and disadvantages of the three types of spray discs are as follows:

• Stainless steel disc: It has a more uniform spray effect and strong cold resistance;
• Ceramic disc: It has a higher smoothness and lower adhesion to scale, which not easy to produce scale, but it is not resistant to low temperature, and it is easy to burst below zero.
• Ruby discs: It has the highest glossiness and wear resistance, the fog droplet running speed is fast, and the air absorbs the fog droplet faster, which is suitable for indoor air humidification and adjustment, but it also not resistant to low temperature.

The FK mist nozzle does not require air assistance, which is a hydraulic atomization nozzle. Since this nozzle has a filter plug, the minimum orifice is recommended to be 0.1mm. All water sources supplied to fine mist nozzles must be filtered by a 5~10 micron filter. In addition, groundwater must be softened.

The FK mist nozzle is made of nickel plated brass, 304 stainless steel or 316 stainless steel materials on request, which effectively meets the requirements of high temperature resistance, corrosion resistance, wear resistance, impact resistance and so on. The stainless steel nozzle is machined from bar-shaped material, which is removable, cleanable, durable, and has a service life of 2.5 times that of brass.

Construction:

• Two-piece body with round cap and anti-drip valve
• Unique slotted vane design produces fine mist
• The models listed are machined from bar stock
• Standard materials are nickel plated brass, 304 stainless steel, 316 stainless steel
• All models are available in M8 thread size

Typical Application:

• Leisure cooling
• Mosquito control
• Odor elimination
• Artificial fog landscape
• Humidification of textile workshop
• Supermarket vegetable preservation
• Environmental protection dust removal
• Livestock farm disinfection and cooling
• Humidification in the electronics industry