FA Barb Mist Tip
- Number:
- 160
- Brand:
- RELAB
- Model:
- FA Series
- Construction:
- One-piece body without the anti-drip valve
- Material:
- nickel plated brass or stainless steel
- Connection:
- 6mm or 1/4 inch barb
- Pressure:
- 3-15 bar
- Orifice:
- 0.2mm, 0.3mm up to 1.0mm
- Spray angle:
- 42° to 90° at 10 bar
- Flow rate:
- (0.3mm) 2.5 lph at 10 bar
Design Features
Characteristics:
FA Series is a low pressure micro mist nozzle. There are barbed and threaded connections for choice. This barb mist nozzle is made with a 1/4" barb. The spray angle is from 18 to 90 degrees based on different pressure, and the diameter of the atomized particles is 30 to 80um.
The nozzle doesn't contain any anti-drip device, the water is required to be purified by 20~50 micron filter or screen mesh. The minimum orifice diameter is 0.2mm. The higher the pressure, the better mist effect. Due to the fact that there is a barb and inserted spray disc, a working pressure of less than 10 kg is recommended.
Construction:
- One-piece body construction without anti-drip valve;
- Unique slotted vane design produces fine mist;
- This model listed is machined from bar stock;
- Standard materials are nickel plated brass, 304 stainless steel;
- This model is available in 6mm or 1/4" barb.
Typical Application:
- Leisure cooling;
- Mosquito contro;l
- Odor elimination;
- Artificial fog landscape;
- Supermarket vegetable preservation;
- Humidification of textile workshop;
- Environmental protection dust removal;
- Livestock farm disinfection and cooling;
- Humidification in the electronics industry.