2-nozzle Cluster Seat

Characteristics:

The 2-nozzle cluster seat is a double spray joint designed with a one-in, two-out structure that can connect with two mist nozzles at the same time and spray in two different directions. The nozzle is available in a variety of threads: 10/24, 12/24, W3/16, M5, M8 and 1/8.

This 2-nozzle cluster seat is available in brass or stainless steel with a screw-on interface to ensure no leakage after diverting and the inlet seal can withstand long-term water pressure changes. Its inlet thread is available:  10/24, 12/24, W3/16, M5, M8, 1/8 or 1/4 male.

No professional tools are required for installation, just manual tightening. This 2-nozzle cluster seat can be used with the 701 one-nozzle union or extension rod to enhance the spray effect. During installation, the threads at the connection must be tightly sealed, otherwise the sealing ring will be exposed under the impact of high pressure during long-term operation, resulting in water leakage. The two mist nozzles can be screwed on the joint first, and then the 2-nozzle seat can be screwed to the spray line.

In addition to the existing shape, this 2-nozzle cluster seat is also customizable. In structurally, it can be made into one piece or two-piece style. The inlet connection method can also be customized as thread compression, slip lock or set-screw type to directly connect with the tubes, welcome to consult and negotiate.

Construction:

• One-piece round body with 2 thread holes at 90 deg. angle;
• The models listed are machined from bar stock;
• Standard materials are brass, 304SS and 316SS;
• All models are available in 10/24, 12/24, W3/16, M5, M8, 1/8 and more.

Typical Application:

• Villa misting;
• Mosquito control;
• Outdoor disinfection;
• Barbecue shop cooling;
• Coffee shop humidification;
• Bar fogging for landscaping.