Other Accessories
Relab supplies a complete range of fittings for high pressure misting systems. In addition to the commonly used fittings on the pipeline, we also have many expansion, such as three-nozzle cluster, four-nozzle cluster, five-nozzle cluster, high pressure adjustable ball joints, high pressure ball valves, water filters, extension rods, misting rings, etc.
High Pressure Mist Ring
Relab's misting ring have undergone multiple surface processes, with uniform welding points, no air holes, and no water leakage. Each misting ring has undergone a 70 bar water pressure test before leaving the factory to ensure quality.
- Model:
- 806
- Construction:
- Multi-piece welded circular pipe
- Material:
- 304/316 stainless steel
- Pipe size:
- 9.5mm, 10mm, 12mm
- Inlet Thread:
- 1/4 female NPT or BSPT
- Pressure:
- 70 bar
- Nozzle:
- FE Series 0.3mm/0.4mm
- Ring Size:
- 12 inch to 40 inch/1016mm
Mist Nozzle Flexible Extension Rod
This extension rod is usually made of brass. There is a section of soft purple copper pipe in the middle, which is convenient to bend into different shapes and angles, more flexible to adjust the spray direction.
- Model:
- 807
- Construction:
- Multi-piece welded rod
- Material:
- Brass/Nickel plated brass
- Inlet thread:
- 10/24, M5 male
- Out thread:
- 10/24, M5 female
- Pressure:
- 70 bar/1000psi
- Total length:
- 2 to 24 inch
Adjustable-ball Swivel Joint
This adjustable ball swivel joint supports manual 50-degree left/right swivel and 360-degree horizontal rotation, enabling precise adjustment of spray angle and direction. Compact in size and tool-free installation, it is widely used in indoor and outdoor misting landscapes.
- Model:
- 901
- Material:
- Copper, SS304 or SS316
- Conn. thread:
- 10/24, 12/24, M5, W3/16 male
- Nozzle thread:
- 10/24, 12/24, M5, W3/16 female
- Swivel angle:
- left/right at 50 degree
- Rotate angle:
- 360 degree
- Pressure:
- 105 bar/1500 psi
2-nozzle Cluster Seat
This 2-nozzle cluster seat is available in brass or stainless steel with a screw-on interface to ensure no leakage after diverting and the inlet seal can withstand long-term water pressure changes.
- Model:
- 902
- Material:
- brass, SS304, SS316
- Nozzle thread:
- 10/24, 12/24, M5, W3/16, 1/8 female
- Inlet thread:
- 10/24, 12/24, M5, W3/16, 1/8 male
- Customizable:
- compression, slip lock or set-screw
- Pressure:
- 105 bar/1500 psi
- Length:
- 23-26mm
3-nozzle Cluster Seat
This 3-nozzle cluster is available in brass or stainless steel with a screw-on interface to ensure no leakage after diverting and the inlet seal can withstand long-term water pressure changes. Its inlet thread is available: 10/24, 12/24, W3/16, M5, M8 or 1/8.
- Model:
- 903
- Material:
- Copper, SS304, SS316
- Conn. thread:
- 10/24, 12/24, W3/16, M5, 1/8 male
- Nozzle thread:
- 10/24, 12/24, W3/16, M5, 1/8 female
- Pressure:
- 105 bar/1500 psi
4-nozzle Cluster
The 4-nozzle cluster is a four-way misting joint designed with a one-in, four-out structure that can connect with four mist nozzles at the same time and spray in three different directions. The nozzle is available in a variety of threads: 10/24, 12/24, M5, W3/16 and M6.
- Model:
- 904
- Material:
- Copper, SS304, SS316
- Conn. thread:
- 10/24, 12/24, W3/16, M5, 1/8 male
- Nozzle thread:
- 10/24, 12/24, W3/16, M5, 1/8 female
- Pressure:
- 105 bar/1500 psi
5-nozzle Cluster
The 5-nozzle cluster is a 5-way misting joint designed with a one-in, five-out structure that can connect with five mist nozzles at the same time and spray in five different directions. The nozzle is available in a variety of threads: 10/24, 12/24, W3/16, M5, M6, M8 and 1/8".
- Model:
- 905
- Material:
- brass, SS304, SS316
- Conn. thread:
- 10/24, 12/24, W3/16, M5, 1/8 male
- Nozzle thread:
- 10/24, 12/24, W3/16, M5, 1/8 female
- Pressure:
- 105 bar/1500 psi
6-nozzle Misting Cluster
The 6-nozzle cluster is a 6-way misting joint designed with a one-in, six-out structure that can connect with six mist nozzles at the same time and spray in six different directions. Its inlet thread is available: 10/24, 12/24, W3/16, M5 or M6.
- Model:
- 906
- Material:
- brass, SS304 or SS316
- Conn. thread:
- 10/24, 12/24, W3/16, M5, M8, 1/8, 1/4
- Nozzle thread:
- 10/24, 12/24, W3/16, M5, M6, M8
- Pressure:
- 105 bar/1500 psi
Welding Socket
This welding socket is with standardized internal threads, with available specifications including 10/24, 12/24, w3/16 or M5, flexibly matching models of mist nozzles to meet diverse application scenario needs.
- Model:
- 908
- Material:
- SS304 or SS316
- Nozzle thread:
- 10/24, 12/24, W3/16, M5
- Suitable pipe:
- OD3/8 or 9.5mm
- Pressure:
- 105 bar/1500 psi
- Drilling hole:
- 3-4mm
- Length:
- 10-12mm
Threaded Bushing
Threaded bushing is a kind of conversion joint with internal and external threads, suitable for the conversion of mist nozzles and universal threads. Such as 10/24 to 1/8, M5 to 1/8, 1/8 to 1/4. Made of bar material, it can withstand 70 bar pressure.
- Model:
- 909
- Construction:
- One-piece body
- Material:
- Nickel plated brass, SS304, SS316
- Thread:
- 10/24 to 1/8, M5 to 1/8, 1/8 to 1/4
- Pressure:
- 70 bar/1000psi