Slip Lock Fittings
RELAB 700 Series slip lock fittings are a high-pressure quick connection coupling that can be easily installed without any tool assistance. Compared other similar products, our 700 Series fittings offer better sealing, longer life and resistance to higher pressures, thanks to a unique product design and high processing accuracy. And this fitting is equipped with an 8-talon lock ring, so that it has a very good performance: under a pressure of 70 bar/1000PSI, the tube is tightly fastened by the lock ring, and there is no shaking, so that this product has stronger tightness and applicability, even if the tolerance of pipe outer diameter is 0.2mm, this fitting still has good sealing.
Slip Lock Pipe Union
Model 700 is a linear pipe coupling without thread hole. It is to connect two tubes of the same or different sizes to assist in extending the tube longer. The push lock union will become an end connector when you insert a plug into one end of it.
- Model:
- 700
- Construction:
- slip lock, double seals, without nozzle hole
- Material:
- Ni-brass, 304SS or 316SS
- Pipe size:
- OD1/4, 3/8, 1/2, 10mm, 12mm
- Pressure:
- 10 to 105 bar/1500psi
Slip Lock One-nozzle Connector
There is only one nozzle thread hole for the 701 single-jet fitting. Because of their unique internal structure and lock ring design, in the installation process, only need to fix the pipeline horizontally, which can save users 50% installation time.
- Model:
- 701
- Construction:
- slip lock, double seals and 1-nozzle hole
- Material:
- Ni-brass, 304SS or 316SS
- Pipe size:
- OD1/4, 3/8, 1/2, 10mm or 12mm
- Pressure:
- 10 to 105 bar/1500psi
- Nozzle thread:
- 10/24, 12/24, W3/16 or M5
Double-nozzle Connector
There are two nozzle thread holes for the 701 double-jet fitting. The nozzle holes are angled 180° on both sides of the fitting, and the user can also choose 120° or 150° on request.
- Model:
- 702
- Construction:
- slip lock and double-seal
- Material:
- Ni-brass, 304SS or 316SS
- Pipe size:
- OD1/4, 3/8, 1/2, 10mm or 12mm
- Pressure:
- 10 to 105 bar/1500psi
- Nozzle thread:
- 10/24, 12/24, W3/16 or M5
Slip Lock Tee
The one-piece body is selected from food-grade 304 stainless steel cast by mold, which is the best choice for the food processing industry. Compared with those split and bonded products, our slip lock tee is thicker and cost-free in material.
- Model:
- 703
- Construction:
- slip lock ring and double-seal
- Material:
- Ni-brass, 304SS or 316SS
- Pipe size:
- OD1/4, 3/8, 1/2, 10mm or 12mm
- Pressure:
- 10 to 105 bar/1500psi
Slip Lock Elbow
The 90° elbow is a one-piece body selected from food-grade 304 stainless steel and cast by mold. Compared with those split and bonded products, our push lock elbow is thicker and cost-free in material selection.
- Model:
- 704
- Construction:
- slip lock ring and double-seal
- Material:
- Ni-brass, 304SS or 316SS
- Pipe size:
- OD1/4, 3/8, 1/2, 10mm or 12mm
- Pressure:
- 10 to 105 bar/1500psi
Slip Lock Male Adapter
Model 705 is thread adapter to connect pipes and other thread fittings or machines. One end of this fitting is the slip lock connection inlet, and the other end is the external/internal thread.
- Model:
- 705
- Construction:
- slip lock and double-seal
- Material:
- Ni-brass, 304SS or 316SS
- Pipe size:
- OD1/4, 3/8, 1/2, 10mm or 12mm
- Pressure:
- 10 to 105 bar/1500psi
- Thread size:
- 1/8, 1/4 or 3/8 male BSPT/NPT
Slip Lock Female Adapter
Model 706 is thread adapter to connect pipes and other thread fittings or machines. One end of this fitting is the slip lock connection inlet, and the other end is the external/internal thread.
- Model:
- 706
- Construction:
- slip lock and double-seal
- Material:
- Ni-brass, 304SS or 316SS
- Pipe size:
- OD1/4, 3/8, 1/2, 10mm or 12mm
- Pressure:
- 10 to 105 bar/1500psi
- Thread size:
- 1/8, 1/4, 3/8 female BSPP/NPS
End Cap
For this model, one end is connected to the pipe, the other end is not perforated. It is specially used to seal water at the end of pipe.
- Model:
- 707
- Construction:
- slip lock ring and double-seal
- Material:
- Ni-brass, 304SS or 316SS
- Pipe size:
- OD1/4, 3/8, 1/2, 10mm or 12mm
- Pressure:
- 10 to 105 bar/1500psi
One-nozzle Off-set End
There is a nozzle threaded hole on the other side, the hole is angled 90° to the pipe connection inlet. It is available in three styles: no-hole, one-nozzle hole and two-nozzle hole.
- Model:
- 708
- Construction:
- slip lock ring and double-seal
- Material:
- Ni-brass, 304SS or 316SS
- Pipe size:
- OD1/4, 3/8, 1/2, 10mm or 12mm
- Pressure:
- 10 to 105 bar/1500psi
- Thread size:
- 10/24, 12/24, W3/16 or M5
2-nozzle Off-set End
There is one-nozzle threaded hole on the other side, the hole is angled 90° to the pipe connection inlet. It is available in three styles: no-hole, one-nozzle hole and two-nozzle hole.
- Model:
- 709
- Construction:
- slip lock ring and double-seal
- Material:
- Ni-brass, 304SS or 316SS
- Pipe size:
- OD1/4, 3/8, 1/2, 10mm or 12mm
- Pressure:
- 10 to 105 bar/1500psi
- Thread size:
- 10/24, 12/24, W3/16 or M5
One-nozzle In-line End
This is an in-line pipe end coupling with one-nozzle thread hole. One end of it is a slip lock connection inlet, the other end is a nozzle threaded hole, which is opposite to the its inlet.
- Model:
- 710
- Construction:
- slip lock and double-seal
- Material:
- Ni-brass, 304SS or 316SS
- Pipe size:
- OD1/4, 3/8, 1/2, 10mm or 12mm
- Pressure:
- 10 to 105 bar/1500psi
- Thread size:
- 10/24, 12/24, W3/16 or M5
End Plug
This is an end plug, which has a prefabricated slot to secure the eight-jaw locking ring inside the slip lock fittings. It is compatible with other 700 series couplings. Insert it into one side of the couplings to quickly block a branch, such as tee.
- Model:
- 711
- Construction:
- One-piece plug
- Material:
- Ni-brass, 304SS, 316SS
- Size:
- OD1/4, 3/8, 1/2, 10mm or 12mm
- Pressure:
- 10 to 105 bar/1500psi
700 Series Fastener
The 711 lock ring produced from Relab is an 8-talon fastener. Compared with the ordinary 6-talon lock ring, its unique shape design ensures that the system is more stable during operation.
- Model:
- 712
- Construction:
- 8-talon
- Material:
- Ni-brass, 304SS, 316SS
- Pressure:
- 10 to 105 bar/1500psi
- Size:
- OD1/4, 3/8, 1/2, 10mm or 12mm