Installation and Maintenance

Arrangement of Nozzles

Our products are custom engineered for proper flow, pressure, droplet size, spray profile, spray distribution and impact characteristics to meet your process requirements. A variety of materials, connection types and sizes are available as needed.

Water Quality Requirements for Misting System

The working principle of the high-pressure misting system is the industrial plunger water pump pressurizes the purified and filtered clean water to 70 bar/1000 psi, and transports it to the mist nozzle through high-pressure pipes, then the high-pressure water is sprayed out from the specially designed holes of the nozzles and atomized into mist droplets with a diameter of 5-20μm, are sprayed into the air. These spray particles can increase air humidity, eliminate static electricity, reduce dust, and lower temperature. In addition, adding disinfectant to the water tank also play the role

Connection of Slip Lock Fittings and Steel Pipes

RELAB's high-pressure push-in fittings use a unique 8-talon ring to lock the steel pipe. The thickness of the steel pipe is usually 1.0~1.5mm, which is convenient to lathe a groove at both ends of the pipe without affecting its pressure-bearing capacity.

Slip Lock Fittings VS Press Fittings

The 700 series slip lock fittings, a high pressure quick-connect coupler made by Relab, is widely used in various indoor and outdoor applications such as humidification, cooling, dust suppression, deodorization, disinfection, landscaping, etc. You can complete the docking and installation of fittings and tubes within 3 seconds, which greatly reduces the installation cost and saves a lot of time.

Misting System Pressure Setting

Setting the working pressure of the high-pressure atomization system needs to be based on specific application scenarios, equipment types and design requirements.